Ducasa Programmers

Unlike an old-fashioned, traditional wet radiator system, a major advantage of electric heating is its high level of controllability. With fast heat up times, there is little energy wasted and comfort levels can be maintained at the touch of a button.
This not only results in economy savings for the bill payer, but also reduces carbon footprint and the drain on limited world resources.

Whether using a central programmer or individual thermostatic switches on each radiator, Ducasa’s advanced range of controllers can ensure your heating runs at its optimum level and provides the right level of comfort to suit your needs.

Ducasa 4-Zone Pilot Wire Programmer

The Ducasa Pilot Wire programmer provides total control of the Ducasa Multi-Zone Range which includes the Vitro, Avant DGP and white MCR Colorado Towel Radiator from one centralised position. Not only convenient, the programmer helps keep running costs down by independently controlling different zones in the home.

Each zone can be programmed to switch on at different times so no need to heat the bedrooms during the day or the living areas during the night, unlike traditional central heating. Each heater can be switched between Comfort, Economy, Frost Protection or Off with mode changes possible every hour.

The number of rooms in each zones can be personalised to suit your living style, however most of our systems are installed with one zone for the living areas, one for the bedrooms, one for the hallway and one for the bathrooms. Suggested temperatures for each zone are 21°C for living areas, 18°C for bedrooms and hallways and 22°C for bathrooms however the choice is yours because the temperature of each heater can also be adjusted independently.

Programming couldn’t be easier using the large LCD screen and mode selection buttons; simply select the zone and press the required mode for each hour of the day – that’s it, but if you do have problems remember our aftersales staff are here to help.

Additional features include individual zone overide, total system overide and a holiday mode which switches the system to Frost Protection or Off for the duration of the holiday and then reverts to the previously set programmes.

- Program up to 4 zones independently
- Available as part of the Multi-zone System
- Unlimited number of compatible heaters in each zone
- Comfort, Economy, Frost Protection and Off modes
- Single Zone or Full System Overide
- Holiday Mode
- Easy to Program
- Large LCD Screen

The Ducasa Easy Control

Programme your Inox designer heater with the simple to use Easy Control heating your environment when you want, to the temperatures you want.

This controller really is easy - no complicated digital menus, just movable pegs, time and two temperatures to set.

By moving the pegs with the tool provided you set two programmes choosing between comfort and economy modes for each hour of the day. One of the set programmes can then be chosen for each day of the week.

Final job is to set the required temperature for economy or comfort mode and transmit the setting to your Inox designer panel heater.

- Easy to use 'peg' programmer
- Compatible with the Ducasa Inox
- Adjustable economy and comfort temperatures
- 2 user set programmes
- Hourly mode changes
- Batteries included
- Room temperature displayed when on standby
- Discreet and simply to install

 

Ducasa Digital Programmer

Take control with the Ducasa infrared remote programmer which offers 24hr / 7 day control for your whole home at the touch of a button.

- 24 hr / 7 day programmer
- Available as part of the Multi-zone System
- Comfort, economy, frost protection and off modes
- Automatic, stand by, time adjust & programme functions
- Over ride and holiday functions
- Temperature adjustment and tamper proof functions
- 9 Factory set programmes for convenience
- 5 customisable programmes
- On screen programming and time display
- 3 AA batteries included
- Low battery warning
- Programs remain when battery is changed

The Ducasa infrared remote programmer is compatible with the following product ranges; Vitro, Avant DGP, Colorado towel radiators and the Watt-Flex PLC system.

Printable: Specifications

 

 

 

 

Power Line Communication Systems

Ducasa has developed a range of technically advanced control systems which take advantage of the power cable to send the program signal. This means there is no need to install pilot wires which saves time and money.

In addition to programming, the Watt-Flex constantly monitors the total power required in a property and automatically adjusts the heating system to avoid any overloading. This is ideal in locations where power supply is limited, such as when houses are converted into flats and the existing supply is used rather than going to the expense of having a new mains cable installed.

The following features are available when using the Ducasa Power Line Communication systems. For more information get in touch with our sales team who would be please to help.

- 24 hr / 7 day programmer
- Comfort, economy, frost protection and off modes
- Load monitoring and shedding
- Program up to 6 zones
- Single phase or 3 phase control
- Program multiple heaters and hot water
- Telephone / SIM control
- Adaptor for non-PLC heaters

The Ducasa PLC systems are campatible with the Avant DGP although any heater can be timed to switch on / off or set to frost protection when used in conjunction with the PLC adaptor.

Printable: Specifications